E550T | Legdan.cz
E550T

BASIC CHARACTERISTICS OF THE MACHINE:

Automatic edge bander with inferior holtmelt glue pot (EVA), chain panel - feeding and pre-milling

PLC and ENCODER controlled logic functioning Complete with:

- Thermostatic glue control with automatic stand-by and glue temperature Indicator in case not using

- Diagnostic system with messages for machine use and maintenance

- Statistical operating data: total hours of machine use, total and partial meters of edge used

• Chain panel feeder with rubber pads mounted on a steel chain with lubrication system

• Top pressure bar with a double row of rubber wheels mounted on bearings, height can be adjusted by means of a handwheel fitted with a metric dial.

• Pre milling group with diamond cutterblocks and two (HF) high frequency motors

• Infeed fence with micrometric adjustment Variable milling from 0 to 2 mm, adjustable with a knob and numerical dial.

• Edge feeding feeding synchrony between the panel and the edge to guarantee a perfect glueing

• Pneumatic edge - cutting shear from coil with horizontal oscillatory movement.

• Teflon-coated glue pot allows complete and fast cleaning. Fitted with 6 electrical heating elements (4 in the glue pot, 1 in the turret and 1 inside the glue spreading roller). 2 FLOATING pressure rollers: First Ø 80 mm aluminum, second rubber

• Automatic Front/Rear End Trimming unit (straight cut) with copiers and integrated chipping collection Possibility of independent front/rear cut selection from PLC. End trimming unit tool 2 x Ø 80 mm

• 3 positions flush trimming unit with 2 (HF) high - frequency motors. (HF) Z4 Ø 75 mm cutterblocks, WIDIA disposable knives, Combined profile: Radius/bevel 2 mm Vertical disc copier

• Front extensible support for large panels with Polizene sliding fences

• CE LEGISLATION

TECHNICAL DATA:
  • Feed speed:  9 m/min
  • Part thickness: 8-50 mm
  • Edge thickness in coil: 0.4-3 mm
  • Tape edge thickness (manually inserted): max 5 mm
  • Maximum coil diameter: max 800 mm
  • Minimum length of part (standard version): 110 mm
  • Minimum piece length (VR/VS version): 180 mm (panel height 18 mm), 210 mm (panel height 50 mm)
  • Minimum width of the part: 70 mm
 
PRE-MILL UNIT:
  • Maximum material removal: 2 mm
  • Engine power: 2 x 0.75 kW
  • Dimensions of diamond cutters: Ø 80 x H54 mm
  • Rotation speed: 12,000 rpm
 
GLUING UNIT:
  • Power of heating elements (6 pcs): 1,630 W
  • Heating time (room temperature): 14-16 mm
  • Time required to heat from standby:  4-6 min
  • EVA glue tub capacity: 1 kg
  • PUR glue tub capacity: 1.4 kg
DRIPPING UNIT:
  • Motor power: 0.22 kW
  • Rotation speed: 12,000 rpm
 
ROUGHING UNIT:
  • Engine power: 2 x 0.35 kW
  • Rotation speed: 12,000 rpm
 
ROUNDING UNIT:
  • Motor power: 0.22 kW
  • Tool rotation speed: 12,000 rpm
  • Minimum panel thickness: 8 mm
  • Maximum panel thickness: 45 mm
  • Minimum panel length: 140 mm
Non-binding inquiry
The form has been successfully submitted.